Replacing Components - MBM PEE7750I Manual De Uso E Instalación

form all the procedures described for
daily putting out of service and protect
the parts most exposed to oxidation
as indicated below:
1. Use lukewarm water with a bit of
soap to clean the parts;
2. Rinse the parts thoroughly, without
using pressurised direct water or steam
cleaners jets for cleaning operations
3. Dry the surfaces carefully using
non-abrasive material;
4. Wipe a non-abrasive cloth lightly so-
aked with food-safe Vaseline oil over all
of the stainless steel surfaces in order
to create a protective film.
PLEASE CALL TECHNICAL AUTHORIZED SERVICE AND READ THE
TECHNICAL MANUAL
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
OPERATIONS FOR COMMISSIONING

REPLACING COMPONENTS

- 14 -
For appliances with doors and rubber
gaskets, leave the door slightly ajar to
let it air out and spread protective talcum
powder on the rubber gasket surfaces.
Periodically air the appliances and
rooms.
To make sure that the appliance
is in perfect technical conditions,
arrange for service at least once
a year by an authorised technician of
the assistance service.
6.