MBM WGG74 Manual De Uso E Instalación página 42

(see the protective equipment carried on
the package label).
In the event of prolonged inactivi-
ty, besides disconnecting the sup-
ply lines, you must thoroughly cle-
an all the inside and outside parts of the
appliance.
Wait for the temperature of the ap-
pliance and all its parts to cool off,
so that the operator is not burnt.
DAILY CLEANING
Wait for the temperature
of the grill to cool down,
so that the operator is
not burnt. Do not use
pressurised or direct
water jets or steam cleaners.
1- Lift the cooking grills and use a
non-abrasive sponge to clean them
thoroughly, use slightly soapy luke-
warm water.
2- Apply the cleaning liquid using
normal spray over all steel parts and
manually thoroughly clean the entire
surface using a non-abrasive sponge.
Dry the surfaces using non-abrasive
material
Take the protection off the con-
tainer to facilitate cleaning - see
ILL sect. - REF p).
3- Remove, empty and carefully wash
the containers and their liquid collection
accessories (see Detail A). After clean-
ing, dry them thoroughly
4- Carefully put all removed parts
back in their housing, taking care not
to reverse the assembly sequence.
If necessary, repeat the operations de-
scribed above for a new cleaning cycle.
GRILLS: To remove any incrustations,
use a non-abrasive sponge and mild
detergent liquid. Clean the grills with
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
a damp cloth.
Humidity residue deposited on
the grills can damage the appli-
ance and cause the grills to wear
quickly.
In order to eliminate every resid-
ual of moisture on the grills, to
ward off any early wear, once
routine cleaning operations are over,
switch the appliance on for approxi-
mately 10'.
CLEANING FOR PROLONGED
DEACTIVATION / See chapter 5 /
Daily decommissioning / Prolonged
decommissioning. Air out the appli-
ances and rooms regularly
SUMMARISED TABLE:
OPERATION - FREQUENCY
Before proceeding with the ope-
rations, see chap.2 "Duties and
qualifications"
Should a problem occur, the ge-
neric operator performs the first
search and, if qualified, elimina-
tes the cause of the problem and re-
stores the appliance correctly.
If the problem cannot be resol-
ved, turn the appliance off, di-
sconnect it from the electrical
mains and shut all the supply valves.
Then contact authorized customer
service.
The authorized maintenance te-
chnician intervenes when the ge-
neric operator was not able to
pinpoint the cause of the problem, or
whenever restoration of correct opera-
tion of the appliance entails executing
operations for which the generic opera-
tor is not qualified.
- 18 -
MAINTENANCE
9.