Electrical Connection - Electrolux EFC 9650 Manual De Instrucciones

16 16 16 16 16 electr electr electrolux electr electr olux installation olux olux olux

Electrical connection

Electrical connection
Electrical connection Electrical connection Electrical connection
GB
Safety war Safety war Safety warnings for the electrician Safety war Safety war nings for the electrician nings for the electrician nings for the electrician nings for the electrician
The mains power supply must
correspond to the rating indicated on
the plate situated inside the hood. If
provided with a plug connect the hood
to a socket in compliance with current
regulations and positioned in an
accessible area. If it not fitted with a
plug (direct mains connection) or if the
plug is not located in an accessible
area apply a bi-polar switch in
accordance with standards which
assures the complete disconnection of
the mains under conditions relating to
over-current category III, in accordance
with installation instructions.
IMPOR IMPORT T T T T ANT IMPOR IMPOR IMPOR ANT ANT ANT: : : : : Before re-connecting the ANT
hood circuit to the mains supply and
checking the efficient function, always
check that the mains cable is correctly
assembled.