Using the refrigerator
➤ Lock the shelf on both sides.
Adjusting the item holders
The item holders (fig. b 1, page 6) are plugged in, and can be adjusted to
any level by pushing and pulling.
7.11
Removing/inserting the vegetable compartment
Removing the vegetable compartment (fig. c, page 6)
➤ Open the refrigerator door to 90°.
➤ Pull out the vegetable compartment until the limit stop.
➤ Press in the limit stop on both the guide rails.
➤ Remove the vegetable compartment.
Inserting the vegetable compartment (fig. d, page 6)
➤ Open the refrigerator door to 90°.
➤ Fit the vegetable compartment in the rails.
➤ Slide the vegetable compartment in all the way.
✓ Once it has clicked into place the vegetable compartment is secured from
being pulled out.
7.12
Removing the freezer compartment
Proceed as follows (fig. e, page 7):
➤ Release the freezer compartment door with a screwdriver (A).
➤ Remove the freezer compartment door (B).
➤ Release the freezer compartment base on both sides (C).
➤ Remove the freezer compartment base (D).
I
NOTE
Keep the freezer compartment door and the base in a safe
place to prevent any damage.
When installing, replace the parts in the reverse order.
28
RML9430, RML9431, RML9435
EN