General Description - GYS FLASH 6.24 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
Regulations:
• Machine compliant with European directives.
• The certificate of compliance is available on our website.
• EAC Conformity marking (Eurasian Economic Community)
Waste management:
• This product should be disposed of at an appropriate recycling
facility. Do not throw away in a domestic bin.

GENERAL DESCRIPTION

Your Gysflash is ideal to charge most lead-acid batteries, often used for cars and many other vehicles. The GYSFLASH can be used safely
for : GEL (gel electrolyte), AGM (Absorbant Glass Mat), EFB ( Enhanced Flooded Battery)WET, MF (Maintenance Free), CA (Calcium)...
The Gysflash 6.24 is designed to charge :
- 6V batteries (3*2V elements) from 1.2Ah to 125Ah and yo to 170Ah for maintenance charge,
- 12V batteries (6*2V elements) from 1.2Ah to 125Ah and up to 170Ah for maintenance charge,
- 24V batteries (12*2V elements) from 1.2Ah to 100Ah and up to 140Ah for maintenance charge.
START UP
1. Connect the charger to the battery using the proper accessory (clamps, lugs, etc...).
2. Plug the charger to the mains (single phase 220-240Vac 50-60Hz).
3. Select the mode by pressing the
4. During the charge, the device indicates the charge progress. When indicator
Once indicator
stays on, the battery is fully charged.
5. The charge can be interrupted at any time by unplugging the mains plug or pressing the
6. After charging, disconnect the charger from the mains, then disconnect the charger's connections from the battery.
CHARGE MODES
• Modes and Options description :
6V CHARGE Mode (7.3V/6A) :
Mode designed to charge and maintain (floating charge) 6V batteries. 7 step automatic maintenance cycle.
12V CHARGE Mode (14.6V/6A) :
Mode designed to charge and maintain (floating charge) 12V batteries. 7 step automatic maintenance cycle.
24V CHARGE Mode (29.2V/4A) :
Mode designed to charge and maintain (floating charge) 24V batteries. 7 step automatic maintenance cycle.
« Small battery » option (0.8A) :
This limits the charging current to 0.8A to safely charge small batteries. Activate this option to charge
small batteries (< 12 Ah).
GYSFLASH 6.24
button. After roughly 5 seconds, the charge starts automatically.
blinks, the battery is ready to start the vehicle.
button.
EN
7

Publicidad

Tabla de contenido
loading

Tabla de contenido