DJI SNAIL 5048S Guia Del Usuario página 6

2. Align gap A inside the propeller nut with fin B on the Propeller Adapter.
Press the propeller down onto the adapter firmly and, while holding
the propeller pressed down, rotate the propeller in the lock direction
(propellers marked CW rotate counterclockwise; propellers without
markings rotate clockwise) until you feel it secure in place.
3. To remove the propeller, press the propeller down firmly and, while
holding the propeller pressed down, rotate the propeller in the unlock
direction until it can be removed easily.
A
Take the installation of 5048S Tri-Blade Quick-Release Propellers
for example.
Stand clear of the motors and DO NOT touch the propellers when
they are spinning.
DO NOT mix propeller types.
Use appropriate propellers for your needs, as they wear out easily.
Look after screws properly during installation and removal.
Refer to the DJI Snail Racing Propulsion System User Manual for
more information.
4
B
1
2