Harbor Breeze RLC52WW5C1R Manual Del Usuario página 6

INITIAL INSTALLATION
Check to make sure blades (G) will be at least
2.
30 inches from any obstruction and at least 7 ft.
above the floor.
3. Secure mounting bracket (A) to outlet box (not
included) using screws, spring washers, and flat
washers provided with the outlet box.
WARNING: It is very important that you use
the proper hardware when installing the mounting
bracket (A) as this will support the fan.
Arrange electrical wiring to one side of the
mounting bracket (A).
4.
Remove 10 preassembled motor screws (J) and
lock washers (K) from underside of motor
assembly (E). Save for later use.
Note: Make sure to keep loose hardware
separate to avoid confusion during installation.
2
7 ft.
min.
3 3
Outlet
Box
3 4
E
Lowes.com/harborbreeze
6
30 in.
min.
G
A
K
J