In Case Of Problems - babymoov A014003 Manual De Instrucciones

• Use only the supplied AC adapters, use of other
adapters may cause damage to the baby monitor.
• When not using the monitor for as long period of
time, remove all batteries from the transmitter and
receiver to avoid damage due to battery leakage.
• Disconnect the AC adapter from the wall outlet
when the monitor is not to be operated.
• The baby monitor is best performed within a
temperature range of 0°C to +40°C.
• Do not leave the monitor expose to strong sunlight
for a long time or nearby any heat source, moisture
and excessive dusty environment.
a. 9V AC adapter for transmitter
b. 9V AC adapter for receiver
c. Transmitter unit
d. Receiver unit
e. User manual
b
Problem
• No transmission from the transmitter.
• Transmits without interruption.
• A lot of static and interference.
• Too short communication range.
8
PRECAUTIONS
ACCESSORIES
a

IN CASE OF PROBLEMS

Possible cause
• The batteries have run out or the AC
adapters are not properly connected.
• The transmitter is set in continuous
transmission mode.
• The transmitter is located close to other
electrical apparatus.
• A large number of steel structures
between the transmitter and the receiver.
• The batteries have run out.
BABY MONITOR EASY CARE • Instruction Manual
• Do not open the cabinet, no serviceable part inside.
• Waste Electrical and Electronic Equipment should
be disposed of by selective collection. Do not throw
electrical and electronic equipment away with
unsorted household waste, but dispose of it at a
selective collection point.
c d
Solution
• Install new batteries or check the
connection.
• Switch the Power/VOX/ON knob to VOX
position or place the transmitter further
away from the baby.
• Remove the electrical appliances or move
the transmitter away from the source of
interference or change the channel.
• Reposition the transmitter and the receiver.
• Replace the batteries or use the AC adapter.
e