Troubleshooting - Krups KM101050 Manual Del Usario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IFU_KR_PRELUDE_KM1010_NC00020247-01_Mise en page 1 18/10/10 10:14 Page13
English
THE GRIND
The method of grinding and the level of fineness of the grind have a si-
gnificant impact on the resulting taste of the brewed coffee. Ideally you
should grind fresh roasted whole beans just before brewing. Be aware
that this machine is set to brew the most common grinds found on store
shelves. Typically preground coffees are of a similar size, medium-co-
arse. A very fine grind will produce much stronger flavors but risks be-
coming extracted during the brew cycle producing a more bitter taste.
You can learn more about coffee grinding and about Krups range of
grinders at our website www.krupsusa.com

TROUBLESHOOTING

PROBLEM
Coffee brews too
slowly.
The lid does not
close properly
The stop-drip does
not work
13
POSSIBLE SOLUTIONS
- Descale the machine (see "Descaling" page
10)
- Clean the brew basket and drip stop valve of
coffee residue.
Also clean the permanent filter if applicable.
- Check that there are no issues with the power
supply.
- Use a different quality coffee paper.
- Check that any coffee bean is not clogging the
tank bottom.
- The filter holder must be seated & locked into
the basket.
- Use the handle to seat the filter holder, and then
turn the handle to the locked position.
- Clean the valve under running water, manually
activating the stop-drip.

Publicidad

Tabla de contenido
loading

Tabla de contenido