Aastra 5360 Manual Del Usuario página 5

Forwarding Calls
1. Press the Foxmenu >
.
S
ELECT
2. Select the type of forwarding
3. Select the destination (user
4. Enter the call number and validate.
Reset call forwarding with Foxmenu >
A F
CTIVATED EATURES
Deflecting a Call During the Ringing Phase
1. Press the Foxmenu >
ing phase.
2. Enter the call number and press Foxmenu >
2
.
OK
Transferring During a Call
1. Press the Call key or Foxmenu >
enter the call number and wait until the called
party answers.
2. Press the Foxmenu >
ferred. If no-one answers, cancel with
2 3
/ and take back the first call.
R
CALL ECOVER
Brokering
Switches between two callers without interrupt-
ing the calls. You are making/taking a call:
1. Press Foxmenu >
number and wait until the call is answered.
2. Press the Foxmenu >
and forth between the callers.
Conference Call
Connects several callers for a conference call. You
are making/taking a call:
1. Press Foxmenu >
number and wait until the call is answered.
2. Press the Foxmenu >
3. Add other callers using Foxmenu >
1
again.
CALL
Leaving a conference call: Press the End key.
Callback
The person is busy or does not answer: Foxmenu
> .
C
ALLBACK
Resetting activated features
You can deactivate again all the call forwardings
and other temporarily active functions: Press
Foxmenu > >
M A
ENU
and the function you want.
R /D
ESET ELETE
Installation and Connection
You can set up the phone either at a 40° or a 25°
angle:
1. Insert the footstand as indicated on the instal-
, then
M F
ENU ORWARDING
1
.
2
/subscriber
M
> > /
S R D
ELECT ESET
during the ring-
D
EFLECT
E
NQUIRY CALL
; the call is trans-
C
ONNECT
, enter the call
E
NQUIRY CALL
to switch back
B
ROKERING
, enter the call
E
NQUIRY CALL
.
C
ONFERENCE
E
NQUIRY
F
CTIVATED EATURES
lation diagram until it snaps into place.
2. Plug in the handset and phone cords and feed
>
them through the cable holders.
Notes
3
). • Some function commands of the vocal
announcements
then • Always install the footstand before you plug in
ENU
. the cables.
ELETE
• Always remove the cables before you detach
the footstand.
Connections
,
E
ND
Document Designation
• Document number: eud-0991 / 1.1
• Valid upwards: Ascotel® IntelliGate® I7.7 / Aastra
5000 R5.1
• © 08.2008
Declaration of Conformity, User's Guide and oth-
er documents can be found at
http://www.aastra.com/docfinder
http://www.aastra.com
>
S
ELECT
3
are not to apply on this terminal.
Connecting to the IP network
(Aastra 5360ip only)
Connecting the power supply
(Aastra 5360ip only)
Telephone connection cable
(Aastra 5360 only)
Connecting the handset
3
.
2