Festo CPX Serie Instrucciones Para El Usuario página 21

3.2 Fitting
Dismantling the sub−base or replacing the electronic module:
It is not necessary to remove the plugs and cables con
nected to the sub−base.
Removing the I/O module:
1. Remove the screws and carefully lift up the sub−base.
2. If required: Pull the electronic module carefully away
from the contact rails.
1
Screws, tightening
torque 0.9...1.1 Nm
2
Sub−base
3
Electrical plug
connection
4
Electronic module
5
Contact rails
6
Manifold sub−base
Festo CPX−EA 0503a English
1
2
3
4
5
6
21