To Install The Handle - Husqvarna ST 224 Manual Del Usuario

Locknut 3/8 (1)
Cable guide (1)
Shear pins ¼-20 x 1-¾ (6)
Locknuts ¼-20 (6)
Locknut 5/16-18 (1)
Locknut ¼-20 (1)
Nylon washer (1)
Carriage bolt 5/16-18 x 5/8 (1)
Spring (1)
Shoulder bolt ¼-20 (1)

To install the handle

1. Raise the upper handle to the operating position.
694 - 003 - 07.11.2019
2. Adjust the handle position to one of the mounting
holes (B) and tighten the handle knobs (C) with
the carriage bolts (D).
D
3. Install more carriage bolts (D) and handle knobs
(C) to secure the upper handle (A) to the lower
handle (E).
B
C
9