Care And Maintenance; Main Unit; Dust Sensor; Filter Cleaning - Sharp FP-P35CX Manual De Uso

CARE AND MAINTENANCE

To maintain optimum performance of this air purifier, please clean the unit including
the sensor and filters periodically.
When cleaning the unit, be sure to unplug the power cord, and never handle the plug
with wet hands. Electrical shock and/or bodily injury may occur as a result.

MAIN UNIT

To prevent dirt or stains on the main unit, clean as often as necessary. If stains are allowed to
remain, they may become hard to clean.
Wipe with a dry, soft cloth
For stubborn stains or dirt, use a soft cloth dampened with warm water.
Do not use volatile fluids
Benzene, paint thinner, polishing powder, etc., may damage the surface.
Do not use detergents
Detergent ingredients may damage the unit.
Keep the unit away from water

DUST SENSOR

The sensitivity of the sensor will become
unstable if the sensor is dirty or blocked.
Remove dust from the surfaces of the sen-
sor opening using a vacuum cleaner.

FILTER CLEANING

Clean the top surface of the Pre- Filter lightly with a
vacuum cleaner.
When Pre- Filter is very dirty, wash it in water with mild
kitchen detergent and dry it well in the shade.
After cleaning, press the MODE Selection Button for the
3 seconds with the power cord connected to the outlet.
A long beep will be heard and the operation hours will be
reset. Then the Filter Indicator Light will go out
automatically,
Dust Sensor
Main Unit
True HEPA Filter
Do not wash the True HEPA Filter.
Washing will not improve filter performance, and it may
cause electric shock or malfunction.
Pre-Filter
Care Cycle 1 month
Care Cycle
Opening of dust sensor
Care Cycle
E-10
2 months
2 months
Pre-Filter