Klarstein DARYA Manual Del Usuario página 23

Installation (Vent outside)
Note: When the range hood and appliance supplied with energy other than
electricity are simultaneously in operation, the negative pressure in the room must be
not exceed 4 Pa (4 x 10
Installation (Vent inside)
If you do not have an outlet to the outside, exhaust pipe is not required and the
installation is similar to the one show in section "Installation (Vent outside)".
Installation
Use 2 screws (4 mm x 30 mm) to fix the hood to the wall. Fasten the wall bracket of
the inner chimney with 2 screws (4 mm x 30 mm) as well.
-5
Bar).
1
Inside chimney bracket
Screws 4 mm x 30 mm
EN
23