EGO PSX2500 Manual Del Operador página 31

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Depth-Gauge Clearance
1. The depth gauge should be
maintained at a clearance of 0.025
in. (0.6 mm), as shown in Fig. 23.
Use a depth-gauge tool (available
separately) to check the depth-
gauge clearances.
2. Check the depth-gauge clearance
every time the chain is filed.
Use a flat file and a depth-gauge jointer
(both available separately) to lower all
gauges uniformly (Fig. 24). Depth-gauge
jointers are available from 0.020 in. to
0.035 in. (0.5 mm to 0.9 mm). Use a
0.025 in. (0.6 mm) depth-gauge jointer.
Depth gauges must be adjusted with the
flat file in the same direction the adjoining
cutter was filed with the round file. Use
care not to contact the cutter face with the flat file when adjusting depth gauges.
POLE SAW ATTACHMENT — PSX2500/PSX2500-FC
23
Depth-Gauge Clearance
24
Depth-gauge Jointer
0.025" (0.6 mm)
Flat File
31

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Psx2500-fc

Tabla de contenido