EGO PSX2500 Manual Del Operador página 35

PROBLEM CAUSE
◾
Pole saw
does not cut
◾
properly.
◾
Bar and chain
running hot
and smoking.
◾
◾
Dry or excessively stretched
chain.
Chain not in bar groove.
Check chain tension for over
tightened condition.
Chain oil tank is empty.
Debris in guide bar groove.
POLE SAW ATTACHMENT — PSX2500/PSX2500-FC
SOLUTION
◾
Check the oil level. Refill the oil tank if
necessary.
◾
Remove the battery pack and reinstall
the saw chain, following the section
"REPLACING THE BAR AND CHAIN".
◾
Remove the battery pack and re-
tension the saw chain, referring to
the section "ADJUSTING THE CHAIN
TENSION".
◾
Fill the oil tank with bar and chain
lubricant.
◾
Clear the debris in the groove.
35