EGO PSX2500 Manual Del Operador página 16

WARNING:
fully tightened before operating the tool. Check it periodically for tightness during use.
2
DETACHING THE ATTACHMENT FROM THE TELESCOPIC POWER POLE
1. Switch off the tool and remove the battery pack.
2. Loosen the locking knob.
3. Press the shaft-release button and, with the button depressed, pull the pole saw
attachment out of the coupler to detach it from the telescopic power pole.
16
POLE SAW ATTACHMENT — PSX2500/PSX2500-FC
To avoid serious personal injury, be certain that the locking knob is
Shaft-Release Button
Locking knob
Insert Indication for
Attachment Shaft
Arrow on the
Attachment Shaft
Line