Publicidad
Idiomas disponibles
Idiomas disponibles
KPA-11
1000A AC CLAMP METER
considered a shock hazard.
Remove the battery if the meter is to be stored for long
periods.
Always discharge capacitors and remove power from the
device under test before performing Diode, Resistance or
Continuity tests.
• Voltage checks on electrical outlets can be difficult and
misleading because of the uncertainty of connection to
the recessed electrical contacts. Other means should be
used to ensure that the terminals are not "live".
• If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment
may be impaired.
Function
A AC
V DC, V AC
Resistance,
Continuity,
Capacitance,
Frequency, Duty Cycle
4
Input Limits
Maximum Input
1000A
1000V DC/AC
Diode,
1000V DC/AC
www.grupotemper.com
Publicidad
