koban KPA-11 Instrucciones Operativas página 64

Capacitance Measurements
WARNING: To avoid electric shock, disconnect power to
1. Set the rotary function switch to the cap position.
2. Insert the black test lead banana plug into the negative
(COM) jack.
Insert the red test lead banana plug into the positive (V)
jack.
3. Touch the test leads to the capacitor to be tested.
4. Read the capacitance value in the display
Frequency or % duty cycle measurements
1. Set the rotary function switch to the "Hz/%" position.
2. Insert the black lead banana plug into the negative
COM jack and the red test lead
banana plug into the positive V jack.
3. Select Hz or % duty with the Hz/% button.
www.grupotemper.com
the unit under test and discharge all
capacitors before taking any capacitance
measurements. Remove the batteries and
unplug the line cords.
1000A AC CLAMP METER
KPA-11
13