Advices; Problems, Analysis And Soluctions; Problems, Causes And Soluctions - Skymsen CR-4L Manual De Instrucciones

IMPORTANT
In case of emergency, always unplug the machine.

4.7 Advices

Electrical or mechanical maintenance must be done by qualified personal for such
operation.
Person in charge has to be sure that the machine is under TOTAL SAFETY conditions when
working.
5. Analysis and Solving Problems
5.1 Problems, Causes e Solutions.
This equipment has been designed to operate with the need of minimum maintenance but
the natural wearing caused by longer use of the equipment may occasionally cause some
malfunctions.
If such problem occurs with your Blender refer to Table 03 in which the most common
situations are listed with recommended solutions.
16