Instalation And Pre-Operation; Instalation; Electrical Instalation - Skymsen CR-4L Manual De Instrucciones

2. Instalation and Pre-Operation

2.1 Instalation

2.1.1 Placing
Your equipment must be placed and leveled on top of a dry and stable surface, with
850mm height preferably
850 mm

2.1.2 Electrical Instalation

This equipment was developed for 127 ou 220 volts (60Hz). When you receive the
equipment, check the power rating indicated on cable.
Cable has 3 pins, where the central pin is the Earth . Is mandatory that all pins are plugged
on before start the equipment.
IMPORTANT
Make sure the network voltage is the same as indicated on the cord label.
7