Sr+ Setup For Pioneer Plasma Displays - Pioneer XV-DV333 Manual De Instrucciones

Surround sound and other settings
SR+ Setup for Pioneer plasma
displays
Make the following settings if you have
connected a Pioneer plasma display to this
unit using an SR+ cable. Note that the number
of function settings available will depend on
the plasma display you've connected.
See also Using this unit with a Pioneer plasma
display on page 32.
1 Press SR+ on the remote.
2 When you see 'Setup?' appear in the
display, press ENTER .
3 Use to select the setting you want.
• Vol COff – This unit does not control the
volume of the plasma display
• VOL C ON – When this unit is switched to
one of the inputs that use the plasma
display (DVD, or another one of functions
below), the volume on the plasma display is
muted so only sound from this system is
heard.
4 Assign any input source connected to the
plasma display to the corresponding input
number.
to select the source (DVD, TV, L.1
Use
or L.2), then to select the input number.
This matches this unit's input source with a
numbered video input on the plasma display.
For example, assign DVD:3 if you have
connected the your DVD video output to video
input 3 on the plasma display.
5 When you're finished, press ENTER .
05
23
En