• Processor: > Pentium II.
• Hard Disk: > 2 GB (500MB necessary)
• Operating system: Windows 98SE or higher
• 128 MB RAM
• USB ports 1.1 or higher
• Internet access to download Sw up-dates
19. UP DATING THE TOOL
The tester needs to be updated at regular intervals in order to diagnose and display the
data of new vehicles and sensors introduced in the market.
• Connect the USB cable from the PC port to the suitable connector located at
the top of the tester.
• Power on the tester after connecting the USB cable.
• Launch the update utility you will have installed on the PC, select UPDATE
and follow the on-screen instructions.
• When finished, return the tester to its original condition and close the battery
holder.
In order to update the tester, you will need a PC with the software
supplied on the CD-ROM installed, Internet access and a
password. Obtain the password from your supplier.
27