6. Press the mute/prog button to enter the menu. DEFAULT SETTING 1YES
2NO shows in the display.
7. Use the touch-tone pad to select 1YES or 2NO, or use the cid/vol ( or
) button to move the cursor to 1YES or 2NO. 2NO is the default setting.
NOTE: If you choose "YES" all the settings in the programmable menu are
returned to factory default setting.
8. Press the mute/prog button to save your selection.You will hear a
confirmation tone.
Telephone Operation
Charge Indicator
When the in use/charging indicator on the base or the charge indicator on
the extra charger is lit, the handset is correctly seated in the cradle and is
charging.
Making Calls
1. Pick up the handset, and press theTALK/END/call back button. Listen for a
dial tone.
2. Dial the number you want to call, or dial the number first then press the
TALK/END/call back button.
3. When finished, press theTALK/END/call back button to hang up.
Answering Calls
1. When the phone rings, pick up the handset, and press theTALK/END/
call back button.
2. When finished, pressTALK/END/call back to hang up.
NOTE: Adjust the handset volume by pressing the cid/vol ( or )
button during a call.
Speakerphone Operation
Answering a Call with Speakerphone
1. When the phone rings, press the SPKR button on the handset.
2. When finished, press the SPKR button again to hang up.
30