Ringer Hi/Low/Off Shortcut; Flash/Call Waiting; Number Redial - GE 21009A Guía Del Usario

Ringer HI/LOW/OFF Shortcut

Apart from the setting in the main menu, there is a shortcut to set the
ringer. Make sure the phone is OFF (not in talk mode).
1. Press the #pause/ringer button to go to RINGER VOLUME menu. SET
RINGER 1HI 2LOW 3OFF shows in the display.
2. Use the touch tone pad on the handset to select 1HI, 2LOW or 3OFF, or
use the cid/vol ( or ) button to scroll to your selection.
3. Press #pause/ringer button to save your selection.You will hear a
confirmation tone and the new volume setting shows in the display for 2
seconds and you will hear a confirmation tone.

Flash/Call Waiting

If you subscribe to the combined Call Waiting Caller ID service from your
local telephone company, you will receive Caller ID information (if available)
on Call Waiting calls. During a phone call, you will hear a beep to indicate
another call is waiting on the line and the Caller ID information for the
waiting call shows on the handset display.
• To connect to the waiting call, press the FLASH/answerer button on the
handset, and your original call is put on hold.
• To switch between the two calls, press the FLASH/answerer button.
TIP: Don't press the TALK/END/call back button on the handset to
activate a custom calling service, such as call waiting, or you'll hang up the
phone.

Number Redial

You may redial a number up to 32 digits long.
To quickly redial the last number you dialed:
1. Press theTALK/END/call back or SPKR buttons.
2. Press the REDIAL button.
-OR-
To choose from the last three numbers you dialed:
1. Press the REDIAL button first, then use the cid/vol ( or ) button to
select the desired redial number.
• Press the cid/vol () to review the oldest call and scroll toward the most
recent calls (higher numbers).
32