Microlife BP3GU1-8X Manual De Instrucciones página 17

4.2. Power switch
To activate your monitor, push the switch on the right
hand side downwards to the unlock position.
4.3. Setting the date and time
1. After the new batteries are activated and
the monitor is unlocked, the year number
flashes in the display. You can advance
the year by pressing minus and plus. To
confirm and then set the month, press
TIME.
2. You can now set the month using the
minus and plus. To confirm and then set
the day, press TIME.
3. Please follow the instructions above to
set the day, hour and minutes.
4. Once you have set the last minute and
pressed TIME, the date and time are set
and the time is displayed.
5. If you want to change the date and time,
press and hold TIME for approximately 3
seconds until the year number starts to
flash. Now you can enter the new values
as described above.
6. To bypass setting date and time, press
the time.
locked
unlocked
TIME PM
15