Setting The Clock - Teac SR-2 Manual Del Usuario

1 If the unit is on, press the STANDBY/ON button to
turn it standby.
2 Press and hold the CLOCK ADJ button for more
than 3 seconds.
"12 HR" or "24 HR" blinks on the display.
< When no button is pressed for 10 seconds, the timer
setting mode will be cancelled.
3 If you want to change the hour mode, turn the
TUNING knob, and then press the CLOCK ADJ
button again.
The "hour" value blinks.
12

Setting the Clock

/
CLOCK ADJ
STANDBY/ON
4 Turn the TUNING knob to set the current hour,
and then press the CLOCK ADJ button.
The "minute" value blinks.
5 Repeat step
and "day".
When "day" is set, the clock starts.
< You can also use the skip buttons (.//) instead of
the TUNING knob.
TUNING
4 to set "minute", "Year", "month"