Features; Technical Data - Surtek SC407D Manual Del Usario

cutting tool may contact hidden wiring or its
own cord. Contact with a "live" wire will make
the exposed metal parts of the tool "live" and
shock the operator.
Always clamp the workpiece securely so it will
not move when making the cut.
Always use a rip fence or straight edge guide
when performing rip cuts. This improves the ac-
curacy of the cut and reduces the chance of the
blade binding.
Always use blades that have the correct size
and shape (diamond vs. round) arbor holes.
Blades that do not match the mounting hard-
ware of the saw will run erratically and cause
loss of control.
Never use damaged or incorrect blade washers
or bolts. The blade washers and bolts were spe-
cially designed for your saw for optimum per-
formance and safety of operation.
Never cut more than one piece at a time. Do not
stack more than one workpiece on the work-
table at a time.
Avoid awkward operations and hand positions
where a sudden slip could cause your hand to
move into the blade.
Never reach into the cutting path of the blade.
WARNING: Use of this product can generate
dust containing chemicals known to the state of
California to cause cancer, birth defects or other
reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and
other masonry products.
• Arsenic and chromium, from chemically treat-
ed lumber. Your risk from these exposures var-
ies, depending upon how often you do this type
of work.
To reduce your exposure to these chemicals:
• Work in a well-ventilated area.
• Work with approved safety equipment, such
as those dust masks that are specially designed
to filter out microscopic particles.
Avoid prolonged contact with dust from power
sanding, sawing, grinding, drilling and other
construction activities. Wear protective cloth-
ing and wash exposed areas with soap and wa-
ter. Allowing dust to get into your mouth, eyes
or lay on the skin may promote absorption of
harmful chemicals.
WARNING: Use of this tool can generate
and/or disburse dust, which may cause serious
and permanent respiratory or other injury. Al-
ways use NIOSH / OSHA approved respiratory
14
protection appropriate for the dust exposure.
Direct particles away from face and body.

FEATURES

KNOW YOUR TOOL
Before attempting to use this product, become
familiar with all of its operating features and
safety requirements.
2
3
4
5
1. FRONT HANDLE.
2. REAR HANDLE.
3. LOWER BLADE GUARD LEVER.
4. BASE.
5. LOWER BLADE GUARD.
6. SPINDLE CLAMPING SCREW.
7. BLADE.
8. BEVEL SCALE.
9. BEVEL ADJUSTMENT LOCKING KNOB.
SC407D
VOLTAGE-FREQUENCY
NO LOAD SPEED
WHEEL CAPACITY
CUTTING CAPACITY
POWER
WEIGHT
SC707B
VOLTAGE-FREQUENCY
NO LOAD SPEED
WHEEL CAPACITY
CUTTING CAPACITY
POWER
WEIGHT
UNPACKING
This product has been shipped completely as-
sembled, except cutting blade.
1. Carefully remove the tool and the accessories
from the box. Make sure that all items listed in
the packing list are included.
1
8
9
7
6
120 V ~ 60 Hz
4 500 r/min
7-1/4" (185 mm)
44 cm - 65 mm
1 200 W
4,25 kg (5,91 lb)
120 V ~ 60 Hz
4 500 r/min
7-1/4" (185 mm)
44 cm - 65 mm
1 500 W
4,25 kg (5,91 lb)