Front Panel - Yamaha C-5000 Manual De Instrucciones

A. STANDBY/ON/OFF (Power)
switch/ indicator
Turns the power to the unit on (standby) or off.
STANDBY/ON: Switches between standby and on using
the A AMP key on the remote control.
OFF: Turns the power to the unit off.
Power status
On mode
Standby mode
Off mode
The unit will enter standby mode not only when you
press the AMP key on the remote control, but also in one
of the following events:
• If the unit is powered on but not operated for eight
hours while the auto power standby function is turned
on, or
• If you turn off the power to the device that is connected
to this unit's TRIGGER IN jack.
For more information, refer to " Q AUTO POWER
STANDBY switch" in the "Rear panel" section (page
13) and to "Trigger connections" (page 24).
6

Front panel

Indicator
Lit brightly
Lit dimly
Off
Note
After you turn on the unit, it will take a few seconds before
the unit can reproduce sound .
NOTICE
If you plan not to use the unit for an extended period of
time, be sure to unplug the power cord from the AC outlet .
Even when the STANDBY/ON/OFF (Power) switch is turned
off (the power indicator is dark), a minimal amount of
electric current is still flowing to the unit .
B. Remote control sensor
Receives signals from the remote control. For more
information, refer to "Operating the remote control"
(page 18).
C. PHONES jack
Connect your headphones here to listen to music
privately. For more information, refer to "Connecting
headphones" (page 32).