Controls And Signals - LAVAZZA LB COMPACT Instrucciones De Empleo

Dosed (i.e. programmable)
supply
Free (i.e. programmable)
supply
1 2 3 MACHINE STATUS
Pod tray full
Heating
Ready
Supply
Supply start with no pod fitted in
Full tray reset
Lever opening
No water alarm - water flow
anomaly
Storing the dose into the memory
Excessive temperature alarm

CONTROLS AND SIGNALS

1
3
EVENTS
LEDs 2 and 3 flashing ON and OFF when the eighth pod
is supplied.
LEDs 1 and 3 flashing ON and OFF.
LEDs 1 and 3 steadily ON.
The LED for the selection made is flashing
(in the example, button 1).
The LED for the selected button (in the example, but-
ton 1) and the red LED are flashing ON and OFF (four
times). Next, LEDs 1 and 3 come ON again, to indicate
that the machine is ready.
Reset occurred (LEDs 2 and 3 will be ON for 2 seconds).
LEDs 1 and 2 flashing ON and OFF.
the supply and will be notified by LED 2 flashing. Once
THE COFFEE".
onds, the machine will enter the dose storing mode,
pressing the same button again when the desired dose
has been obtained, the machine will store the supplied
amount into the memory, for the next supply instances.
LED 2 steadily ON. Contact the service centre.
Status LED
E N
2
2
-
13