Preset dose coff ee brewing button.
1
Preset dose large coff ee brewing button.
2
Free dose coff ee brewing button.
3
MACHINE STATUS
Heating
Opening of the capsule loading arm while the
machine is heating
Machine ready (correct temperature)
Brewing coff ee (buttons 1, 2, 3). In the example,
button 1
Programming coff ee dose (button 1, 2). In the
example, button 2
"Start brewing coff ee" button pressed with-
out capsule inserted
No water in tank
Used capsule drawer/ drip tray is full, posi-
tioned incorrectly, or absent
Extraction of used capsule drawer/ drip tray
when not full
Opening of the capsule loading arm while the
machine is heating
Opening of the capsule loading arm when the
machine is ready (correct temperature)
Energy saving
Machine broken
= Off
= Flashing
CONTROLS AND SIGNALS
SOUNDS EVENTS
1 2 3
= On
= Sound
1
2
1 tone when capsule loading arm opens. Left button fl ashes.
Melody.
1 tone when "start brewing" button pressed.
The pressed button fl ashes, the others are lit.
1 tone at the beginning and end of programming.
The pressed button fl ashes, the others are lit.
Intermittent tone during programming.
1 tone when "start brewing" button pressed and alternate fl ashing for
about 3 sec.
1 tone when button pressed to end programming.
2 tones that indicate that the tank is empty. Buttons start fl ashing.
1 tone indicates tank fi lled or topped up.
3 tones when the drawer is removed. The buttons start fl ashing.
1 tone when drawer is inserted but not full.
3 tones when the drawer is extracted. The buttons start fl ashing.
1 tone when drawer is inserted but not full.
1 tone when capsule loading arm opened. The two external buttons
fl ash.
1 tone when opening and closing capsule loading arm.
The machine goes into energy saving mode after about 1 hour of
inactivity. Melody when any button pressed or capsule loading arm
lifted, indicating machine restart.
Continuous tone for 40 seconds.
The tone is repeated if any brewing button is pressed.
= Tune
E N
3
= Blink
= Fade
13