Kenmore DU2012 Manual De Uso Y Cuidado página 8

4. Insert the combination tool onto the
accessory storage post located on the
back of the main body.
5. Make sure the upper and lower cord
hooks are in the proper position as
shown. Wrap the power cord loosely
around the upper and lower cord hooks.
NOTE:
Make sure to wrap the power
cord around the upper cord hook first, and
then around the lower cord hook to avoid
damaging the power cord.
Upper Cord
Hook
ASSEMBLY INSTRUCTIONS
Lower Cord
Hook
6. Lock power cord plug onto the power
cord.
WARNING
Electrical Shock and Personal Injury
Hazard.
Wrapping the cord too tightly with
excessive stress on the cord may cause
cord damage. A damaged cord is an
electrical shock hazard and could cause
personal injury or damage.
- 8 -
Power Cord Plug
Power Cord