Machine Setup; Handle Attachment; Installing Battery Pack - Tennant V-LWU-13B Manual De Operación Y Partes

MACHINE SETUP

HANDLE ATTACHMENT

1. NOTE: Do not turn on the vacuum until it is
completely assembled.
2. The vacuum cleaner and the handle are packed
separately and require assembly.
3. Remove the handle bracket by removing the two
screws.
4. Place handle onto the back of the vacuum, aligning
holes with pegs.
5. Place the handle bracket back into position.
6. Secure with two screws removed in step 3. Tuck
the cord into the space to the left of the handle.
Tennant V-LWU-13B, (02-2021)
7. Open the bag compartment to ensure a vacuum
bag is in place.

INSTALLING BATTERY PACK

To install the battery, line up the bottom of the
battery with the posts at the base of the coupling.
Push the battery in until it clicks.
English
EN
7