Adjusting The Stands; Power Connection - Beko BFSB3622SS Manual Del Usuario

Installation

3.3. Adjusting the stands

If the product is not in balanced position, adjust the
front adjustable stands by rotating right or left.
In order to adjust the doors vertically,
position of the door
In order to adjust the doors horizontally,
Loosen the fixing bolt on the top
Screw the adjusting bolt (CW/CCW) on the side
according to the position of the door
Tighten the fixing bolt on the top for the final
position
adjusting nut
Refrigerator / User Guide

3.4. Power connection

A
B
C
adjusting nut
fixing nut
fixing nut
9 /28 EN
WARNING:
multi sockets in power connection.
WARNING:
must be replaced by Authorized
Service.
When placing two coolers in adjacent
position, leave at least 4 cm distance
between the two units.
Our firm will not assume responsibility for any
damages due to usage without earthing and
power connection in compliance with national
regulations.
The power cable plug must be easily
accessible after installation.
Do not use multi-group plug with or without
extension cable between the wall socket and
the refrigerator.
Do not use extension or
Damaged power cable