Troubleshooting - Hunter 90121 Manual Del Usuario

STORAGE
1. Disassemble and clean fan be-
fore storing.
2. ALWAYS store the fan in a dry
place.
3. NEVER store the fan while it is
still plugged in.
4. NEVER wrap the cord tightly
around the fan.
5. DO NOT put any stress on the
cord where it enters the fan, as
it could cause the cord to break.
10
41746_CentFan_04.29.05.indd 10

TROUBLESHOOTING

PROBLEM
• Fan will not work.
SOLUTION
• Make sure the interlock switch is
properly installed as directed in the
assembly instructions.
PROBLEM
• Fan will not oscillate.
SOLUTION
• Push down on knob on top of mo-
tor housing to activate os cil la tion.
PROBLEM
• Can not adjust the
angle of the fan.
SOLUTION
• Loosen the screw on the side of
the fan neck. Adjust to the desired
angle and tighten the screw.
If you have tried these trou ble -
shoot ing solutions and still have
trouble, visit our Web site at http:
//www.hunterfanglobal.com.
HUNTER FAN COMPANY
2500 FRISCO AVENUE
®
MEMPHIS, TN 38114, USA
Printed in China
41746-01 05/02/2005
5/2/05, 10:51:06 AM