Sauder 413072 Instruccions De Asemblaje página 17

Tabla de contenido

Publicidad

12
12
Refer to the enlarged diagram to identify the parts on the HINGES.
The DOORS may need some adjustments. Follow the text below to make needed adjustments.
DOOR ADJUSTMENTS:
To adjust the DOORS from side to side (horizontal), loosen the mounting screw several turns, then turn the adjusting screw in or out.
Tighten the mounting screw after making adjustments.
To adjust the DOORS up and down (vertical), loosen both vertical adjustment screws. Move the DOORS up or down to the desired
location. Tighten the screws after making adjustments.
To adjust the DOORS in or out (depth), loosen the mounting screw one turn and move the DOORS in or out, as needed. Tighten the
mounting screw after making adjustments.
413072
Mounting screw (depth)
(vertical adjustment)
www.sauder.com/services
Adjusting screw
(horizontal)
Page 17

Publicidad

Tabla de contenido
loading

Tabla de contenido