CARE & MAINTENANCE
REMOVING THE COVER
1.
Remove headrest cover by pulling fabric away from channels
along the outside of the headrest.
2.
Remove main cover by pulling fabric away from channels, starting
along the outer side walls.
3.
Remove cover from seat bottom by detaching velcro and elastic
loops from seat shell along outer edges and bottom of booster
seat.
INSTALLING THE COVER
1.
Pull seat cover over booster seat bottom. Velcro cover to seat
shell. Tuck edges into channels along outside edge, cup holder
connectors and bottom of seat.
2.
Pull the seat cover over side walls and tuck edges and plastic tabs
into channels along outer side walls.
3.
Pull headrest cover over headrest and inserting tabs into channels
near the upper belt path guides on the bottom of the headrest.
Tuck edges of fabric into channels along outer headrest.
NOTE:
Ensure all plastic tabs and edges are securely installed
before use.
22
monterey 5
Use mild detergent
CLEANING FABRICS: Seat Pad, Infant Support, Harness and Buckle Pad
CLEANING HARNESS: Harness and Buckle Straps
CLEANING FABRICS: Seat Cover
Spot clean only with
Dry flat and in the
Machine wash in cold
Dry flat and in the
warm water. Use mild
shade only, before
water on gentle cycle.
shade only
detergent
re-use
Use mild detergent
CLEANING PLASTICS: Seat Shell and Components.
CLEANING PLASTICS: Seat Shell and Components
CLEANING HARNESS: Harness and Buckle Straps
Spot clean only with
Towel dry
Spot clean only with
Dry flat and in the
warm water. Use mild
completely before
warm water. Use mild
shade only, before
detergent
re-use
detergent
re-use
DO NOT
use solvents or any other chemical or cleaning agent.
CLEANING PLASTICS: Seat Shell and Components
DO NOT
lubricate any part of the seat.
Spot clean only with
Towel dry
US EN
warm water. Use mild
completely before
detergent
re-use
US EN
CARE & MAINTENANCE
DO NOT bleach or
DO NOT bleach,
iron
iron or dry clean
DO NOT bleach
DO NOT bleach or
iron
DO NOT bleach
diono.com
23