Surtek HL732 Manual De Usuario Y Garantía página 19

E N G L I S H •
U s er 's M an u al
expel the air from the hose. When all the air has
been removed, turn of f the water supply and
reconnect the hose. Turn on the water supply
and pull the trigger to expel any air in the gun/
wand.
NO OR LOW PRESSURE (after a period of
normal use)
Worn seal or packing: Have it replaced by your
dealer.
Worn or obstructed valves: Have it replaced by
your dealer.
Worn unloader piston: Have it replaced by your
dealer.
Worn E-Z start valve: Have it replaced by your
dealer.
WATER LEAKING AT THE GUN/SPRAY WAND
CONNECTION
Worn or broken O-ring: Check and replace.
Loose hose connection: Tighten.
WATER LEAKING AT THE PUMP
Loose connections: Tighten.
Piston packings worn: Have it replaced by your
dealer.
Worn or broken O-rings: Have it replaced by
your dealer.
Pump head or tubes damaged f rom freezing:
Have it replaced by your dealer. See "Storage"
on page18.
OIL LEAKING AT THE PUMP
Oil seals worn: Have it replaced by your dealer.
Loose drain plug: Tighten.
Worn O-rings: Check and replace.
PUMP PULSATES
Nozzle obstructed: Clear the nozzle.
19