Makita DMR300 Manual De Instrucciones página 15

The alarm options are as follows:
ONCE
DAILY
WEEKDAYS
WEEKENDS
4. Press the Tuning control knob
setting.
NOTE: There is no volume adjustment for buzzer
alarm.
When the alarm sounds
To cancel a sounding alarm, press the Power but-
ton .
Disabling/cancelling alarms
To disable an active alarm, press and hold the corre-
sponding alarm button to cancel the alarm.
Snooze
When the alarm sounds, press any button other than
the Power button to stop the alarm for 5 minutes.
"SNOOZE" will appear on the display.
To adjust the silence time, follow the procedures below:
1. Press and hold the Menu/Info button
the menu setting.
2. Rotate the Tuning control knob
appears on the display. Press the Tuning control
knob to enter the setting. Rotate the Tuning control
knob to adjust the silence time from 5, 10, 15 and 20
minutes.
NOTE: To cancel the snooze timer while the alarm is
suspended, press the Power button
Sleep timer
Your radio can be set to turn off automatically after a
preset time has elapsed. The Sleep Timer setting can
be adjusted for 15, 30, 45, 60, 90, or 120 minutes.
1. Press and hold the Power button
the Sleep Timer setting. "SLEEP 60 MINUTES" will be
shown on the display.
2.
Keep holding the Power button
timer options will start switching on the display. Release
the Power button when the desired Sleep Timer
setting appears on the display. The setting will be saved
and the icon for sleep timer (
display.
NOTE: Your radio will switch off automatically after
the preset Sleep Timer has elapsed.
NOTE: To cancel the sleep timer before the preset
time has elapsed, simply press the Power but-
ton to turn the radio off.
The alarm will sound
once
The alarm will sound
everyday
The alarm will sound only
on weekdays
The alarm will sound only
at weekends
to confirm the
to enter
INFO
MENU
until "SNOOZE"
.
to enter
. The sleep
) will appear on the
Loudness
You can get compensation on lower and higher
frequency for your radio by adjusting the loudness
function.
1.
Press and hold the Menu/Info button
the menu setting.
2.
Rotate the Tuning control knob
<LOUDNESS> appears on the display. Press the
Tuning control knob to enter the setting.
3. Rotate the Tuning control knob
<ON> or <OFF> to turn on or turn off the loudness func-
tion, then press the Tuning control knob
the setting.
NOTE: To turn off the loudness function, select
<OFF> and press the Tuning control knob
firm the setting.
Listening to Bluetooth
You need to pair your Bluetooth
before you can auto-link to play/stream Bluetooth
music through your radio. Paring creates a permanent
"bond" so two devices can always recognize each other.
Pairing your Bluetooth
1. Press the Source button
function. "READY BLUETOOTH" will be shown on the
display and "READY" will flash.
2. Activate Bluetooth
the device's user manual to allow the paring procedure.
3.
Press and release the Pair button
BLUETOOTH" will be shown on the display and it will
flash. You can start the search of your radio on your
®
Bluetooth device. Once the name of your radio is
appeared on your Bluetooth
®
your Bluetooth list.
NOTE: With some mobiles (versions earlier than
®
BT2.1 Bluetooth
pass code "0000".
4. Your Bluetooth
radio. Once connected, "CONNECTED BLUETOOTH"
will appear on the display.
You can now play the music in your Bluetooth
via your radio.
Playing Bluetooth
already paired
1. Press the Source button
function. "READY BLUETOOTH" will be shown on the
display and "READY" will flash.
2.
Search and link the radio on your Bluetooth
device. Some device may link with the radio
automatically.
You can now play the music in your Bluetooth
via your radio.
15 ENGLISH
until
to choose
®
music
®
device with your radio
®
device
to select Bluetooth
®
on your device according to
®
device, press the item in
device), you may need to input the
®
device will be linked with the
®
device which has
to select Bluetooth
to enter
INFO
MENU
to confirm
to con-
®
®
. "PAIR
®
device
®
®
®
device