Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Cleanincj
the Lens
1. Prior to cleaning,
make sure the light switch is in the "OFF"
position and the light plug
is disconnected from the power supply.
2. Do not dean the glass lens when warm.
Allow to cool before cleaning.
Sudden change in
temperature
may cause cracking of the glass lens.
3. Use a damp towel to dean the surface of the glass lens.
4. Allow the lens to dry before reconnecting
the light plug to the power supply and turning
the
light switch to the "ON"
position.
iMPORTANT
•
Since ]971 the National
Electric Code (NEC) has required Ground Fault interrupter devices on all outdoor
circuits.
if your residence was built before ]97]0 check with a qualified electrician to determine if a Ground Fault
interrupter protector exists.
Do not use this appliance if the circuit does not have GFI protection.
•
Do not plug this appliance
into an indoor circuit.
1. To protect against electric shock, do not immerse cord or plugs in water or other liquid.
2. Unplug from the outlet when
not in use and before cleaning. Allow to cool before putting on or taking
o ffparts.
3. Do not operate grill with a damaged
cord, plug, or after the appliance
malfunctions
or has been damaged
in any
manner.
4. Do not let the cord hang over the edge of a table
or touch hot surfaces.
5. Do not use an outdoor cooking gas appliance
for purposes other than intended.
6. When connecting,
first connect plug to the outdoor cooking gas appliance
then plug appliance
into the outlet.
7. Use only a Ground Fault Interrupter(GFI)
protected
circuit with this outdoor cooking gas appliance.
8. Never remove the grounding
plug or use with an adapter of 2 prongs.
9. Use only extension cords with a 3 prong grounding
plug, rated for the power
of the equipment,
and approved
for
outdoor
use with a W-A marking.
464225913
_ 17
Publicidad
Tabla de contenido
