Symbol
Description
V
Volts
A
Amperes
Hz
Hertz
Min
Speed
-1
~
Alternating Current
n o
No Load Speed
Wear Safety Goggles
Wear Ear Protection
Wear Dust Protection
Read Instructions
Double Insulation Protection
CE Certification
CSA Certification
Waste Electrical &
Electronic Equipment
Warning
www.evolutionpowertools.com
INTENDED USE OF THIS POWER TOOL
WARNING: This product is a hand held
reciprocating saw and has been designed
to be used with special Evolution blades.
Only use accessories designed for use in
this machine and/or those recommended
specifically by Evolution Power Tools Ltd.
When fitted with an appropriate blade,
and with the workpiece contact plate
firmly on the workpiece, this machine can
be used to cut:
Wood
Mild Steel, Aluminium, and
many other non-ferrous metals.
Most plastics.
PROHIBITED USE OF THIS POWER TOOL
WARNING: This product is a hand held
reciprocating saw and must only be used
as such. It must not be modified in any way,
or used to power any other equipment or
drive any other accessories other than those
mentioned in this instruction manual.
WARNING: This machine must not be used to
cut any material that may contain asbestos.
If the presence of asbestos is suspected,
consult the relevant authorities for advice.
WARNING: This machine is not intended
for use by persons (including children) with
reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless
they have been given supervision or instruction
concerning the safe use of the machine by a
person responsible for their safety and who is
competent in its safe use.
Children should be supervised to ensure
that they do not have access to, and are not
allowed to play with, this machine.
6