Turn On The Camera; Choose The Language - HP R837 Manual Del Usuario

1. Plug the small end of the USB cable into the camera,
and the large end into the power adapter, as shown.
2. Plug the power adapter into an electrical outlet.
The camera's blinking Battery Charging light indicates
that the battery is charging; the battery is fully charged
when the light stays on solid (approximately 2–3 hours).

Turn on the camera

To turn on the camera, slide the
lens cover open until it clicks,
uncovering the lens.
To turn off the camera, slide the
lens cover closed until it clicks,
covering the lens.
Caution
fingers clear of the lens. Fingerprints on the lens
can impair the quality of the picture.

Choose the language

Use to choose the
language that you want, then
press .
10
When sliding the lens cover, keep your
HP Photosmart R837 Digital Camera