Updating The Software - Rothenberger ROCAM 3 Instrucciones De Uso

Step 3:
You then return afterwards into the menu and select the menu point „Remove USB stick" and
confi rm with „YES". Your USB stick is formatted and you can now connect it to your PC.
Downloading software
Step 4:
Go to the ROTHENBERGER homepage (www.rothenberger.com). Then proceed as follows:
 Service  Technical Downloads  Software  ROCAM 3 Multimedia Update
Select the update and download it.
Step 5:
Unpack the downloaded fi le and save this on the hard-disk (desktop).
There is an operating manual available as a pdf in the downloaded fi les folder and a folder with
update fi les in it.
Open the folder with the update fi les in it and copy these fi les.

Updating the software

Step 6:
Connect the USB stick to your PC, go to the workplace and open the USB stick. Ensure that the
USB stick is called „ROCAMdat". If this is not the the case then the stick is not formatted yet.
Please follow steps 1-3 to format the stick.
You now insert the previously copies fi les from the folder „Software 1.05" onto the USN stick
using a right click on the the mouse. The update is now present on your USB stick. Remove the
USB stick from your PC.
ENGLISH 41