Rothenberger ROCAM 3 Instrucciones De Uso página 31

Start/stop recording
Zero position on metre counter
Zoom out
Zoom in
Reduce brightness
Increase brightness
Notes on proper handling:
Please use your ROCAM 3 Multimedia only with the USB stick included, or with USB sticks of 4
GB or more.
If you use a different USB stick than the one included, it should be formatted to FAT32. The sys-
tem does not recognize NTFS formatted sticks, and they must be properly reformatted. Further-
more the parameter „Size of the allocation units" must be at least 16 kilobytes otherwise errors
can occur during recording.
Remove the USB stick only when you have securely logged out through the software, as described
in Point 6 above. Improper removal of the stick can lead to system errors.
1. Creating an inspection directory:
You can establish a directory for each inspection. Then all photos, videos and log entries (see
No.9) created during inspection will be saved into this directory.
Press the button to open the main menu.
Use the navigation buttons
The camera now recognizes that no USB stick has been inserted. Highlight „Yes" and confirm by
pressing
Confirm selection
Delete
Menu navigation: down
Menu navigation: up
Menu navigation: left
Menu navigation: right
to highlight „Create directory". Press
ENGLISH
to confirm.
29