10
AIR OUTPUT, AIR INTAKE AND LINT
FILTERS
1. Remove upper shell (see Figure 7).
2. Remove filter end cover screws using 5/16"
nut-driver (see Figure 10).
3. Remove filter end cover.
4. Replace air output and lint filters.
5. Wash or replace air intake filter (see Preventa-
tive Maintenance Schedule, page 8).
6. Replace filter end cover.
7. Replace upper shell.
IMPORTANT: Do not oil filters.
Lint Filter
Figure 10 - Air Output, Air Intake and Lint
www.desatech.com
Air Intake
Filter
Air Output Filter
Filters
Filter
End
Cover
113170-01E