Kohler K-3900 Guia De Instalacion página 15

Spring
Clip
6. Reinstall the Side and Back Panels
NOTE: Install the cover when the water and power supplies are run through the floor. The cover is not
designed for use when the water or electrical are connected to wall supplies.
Position the cover over the water supply and electrical supply holes.
Run the docking station cord through the slot in the cover and snap the cover into place on the
supply hose inlet.
IMPORTANT! The spring clip on the cover does not replace the supply hose clip. Do not use the cover
spring clip to replace the supply hose clip.
Align the spring clip on the cover with the supply hose inlet.
NOTE: The clip will easily snap into place on the supply hose inlet. If there is significant resistance, make
sure the clip is not pushing the hose clip out of the way.
Lower the cover and snap the clip into place on the supply hose inlet.
Kohler Co.
Cover
Slot
Docking Station
Cord
Docking
Station Cord
15 1132337-9-B