Install The Seat; Complete The Installation - Kohler K-3588 Guia De Instalacion

Flush Button
Tank Lid
Styrofoam
Float

7. Install the Seat

Position the seat hinges over the seat bracket and set the toilet
seat in place.
Lift the seat up, keeping the hinge in place.
Tighten the setscrews until the seat is firmly held in place.

8. Complete the Installation

Open the shut-off valve. Make sure the tank fills correctly.
Set the tank lid into place.
Align the flush button in the hole in the lid and thread it into the
flush valve until the tank is firmly held in place.
Flush the toilet several times and check for leaks.
Adjust the Water Level
To adjust the water level, turn the Styrofoam float.
Turning the float counterclockwise raises the water level. Turning
it clockwise lowers the water level.
1095641-2-B
Tank
12 Kohler Co.