Rola Adventure System Manual Del Usuario página 5

Please read all instructions carefully before assembly, installation and/or use of this product.
6
Place the empty Cargo Tray onto the support brackets with the lights or reflectors facing rearward.
Line up the outer holes in Cargo Tray with the last hole in each end of the support brackets.
Install the four (4) 5/16" x 2-1/4" long cap screws with 5/16" black zinc flat washers through
the cargo tray and holes in support brackets.
Loosely install the bright or black zinc 5/16" flat washers and lock nuts on cap screws.
Tighten 5/16" cap screws to 12-24 ft-lb.
5/16 x 2-1/4" CAP SCREWS
5/16" FLAT WASHER
(Black Zinc Finish)
5/16" FLAT WASHER
5/16" LOCK NUT
(4 PLACES)
FLAT WASHER
LOCK NUT
Bright Zinc flat washer – if equipped
TOP VIEW OF CARGO TRAY
Cequent Consumer Products, Inc.
Solon, OH 44139 USA
Cequent Help Hotline: 1-800-234-6992
Product Name:
Product Code:
USE THE LAST HOLE IN EACH
END OF SUPPORT BRACKETS
Use outermost holes to
attach cargo tray to
support brackets.
Page 5 of 27
Adventure System
59109 / 59110
Cargo Tray
View of fasteners
to mount tray.
www.rolaproducts.com
(T258) 112816 10-18-05 Rev A