Remote Control - Yamaha A-S3000 Manual De Instrucciones

Controls and functions

■ Remote control

1
AMP OPEN/CLOSE
2
1
1
3
PHONO
CD
BAND
4
PRESET
SOURCE
VOLUME
MUTE
12
En
CD
5
6
2
BAL
2
LINE
MAIN DIRECT
TUNER
7
LAYER
8
9
1 Infrared signal transmitter
Outputs infrared control signals.
2 p AMP key
Turns this unit ON or switches it to STANDBY mode.
For details on STANDBY mode, see "Front panel"
(page 6).
3 Input select keys
Selects the input source to be played back.
The audio signals of the selected input source are
output at the LINE 2 REC jacks.
y
When LINE 2 is selected as the input source, the audio
signals are not output at the LINE 2 REC jacks.
BAL: Selects the component connected to the BAL 1
or BAL 2 jacks (balanced XLR jacks).
LINE: Selects the component connected to the
LINE 1 or LINE 2 jacks.
PHONO: Selects the turntable connected to the
PHONO jacks.
MAIN DIRECT: Selects the component connected to
the MAIN IN jacks. When MAIN DIRECT is
selected as the input source, the audio signals are
not output at the PRE OUT, LINE 2 REC and
PHONES jacks.
CD: Selects the CD player connected to the CD jacks
(unbalanced RCA jacks).
TUNER: Selects the tuner connected to the TUNER
jacks
4 Yamaha tuner control buttons
Control functions of Yamaha tuner. Refer to the
owner's manual of your tuner for details.
Note
Some Yamaha tuners cannot be controlled by this remote
control.