OPTIONAL LIGHT KIT INSTALLATION
2. Unthread the fan pull chain ferrule (J) by twisting
counterclockwise. Remove the reverse switch
screws (FF) from the switch housing cap
Haodwaoe Used
FF
Reverse Switch Screw
3. Thread the fan pull chain through the hole in the
optional switch housing cap (H) and reinsert the fan
pull chain ferrule (J). Insert the reverse switch into
the optional switch housing cap (H) and secure with
the previously-removed reverse switch screws (FF).
Thread the remaining wires from the bottom of the
motor assembly through the hole in the bottom of
the optional switch housing cap (H).
Haodwaoe Used
FF
Reverse Switch Screw
4. Reinstall the fitter plate screws (EE) into the optional
switch housing cap (H).
Impootant:
For final light kit installation, please follow
the instruction in each individual light kit that can be
purchased from you local retailer.
Note:
Refer to the accessory light kit proper size and
wattage of bulb.
Haodwaoe Used
EE
Fitter Plate Screw
2
x 2
J
3
J
x 2
4
H
x 3
13
Switch
Lowes.com/harborbreeze
F
FF
I
FF
F
EE